An atomic absorption spectrophotometer (AAS) comprises several components: a radiation source, an atomizer, a monochromator, and a detector. The radiation source can be a hollow-cathode lamp (HCL) or an electrodeless-discharge lamp (EDL), both of which provide a narrow emission line of the required wavelength. However, some instruments use continuum sources and high-resolution monochromators to achieve a narrow range of radiation.
The atomizer used in AAS can be either a flame atomizer or an electrothermal atomizer. The gas-phase atoms generated by the atomizer often get thermally excited and emit radiation, causing an interference with the radiation source signal. A circular metal disk, called a chopper, is used to eliminate such interference between the radiation source and the flame atomizer. The metal chopper isolates the radiation source by creating an alternating signal, unlike the continuous signal from flame.
In a single-beam spectrophotometer, the radiation passes directly through the atomized sample, while in a double-beam instrument, the source beam is split, with one beam passing through the atomized sample and the other being the reference beam. The two beams are then recombined using a half-silvered mirror. The combined beam then goes through the monochromator, which allows only a narrow wavelength range to reach the detector. The detector is typically a photomultiplier tube that processes and converts the radiation into amplified electrical signals.
An atomic absorption spectrophotometer consists of a radiation source, an atomizer, a monochromator, and a detector.
The radiation source usually has a narrow range, like a hollow-cathode lamp, or HCL, or an electrodeless-discharge lamp, or EDL. Instruments with continuum sources uses very high-resolution monochromators.
Next is the atomizer, with common methods being flame atomization and electrothermal atomization.
Some atoms get thermally excited and emit radiation. This interference can be isolated by using a mechanical chopper between the source and atomizer to give the emissions caused by the source radiation a distinct, constant-frequency pattern.
In a single-beam spectrophotometer, the radiation passes directly through the atomized sample.
A double-beam instrument splits the source beam. One beam passes through the atomized sample, while the other bypasses it. Then, the two beams recombine using a half-silvered mirror.
Afterwards, the beam passes through the monochromator, which sends only a narrow wavelength range to the detector—typically, a photomultiplier tube, which converts light into amplified electrical signals.
繁體中文
